$689 $799
*Check with our team or your local store for availability.
We guarantee that all of our stock is 100% genuine,
Australian sourced stock, with full local warranty.
Colour: Black


  • Twin Wolfson WM8740 24bit DACs used in dual differential configuration
  • New Anagram Technologies ATF2TM 24-bit/384kHz audio up-sampling / jitter reduction
  • Optional Digital Preamp mode allowing connection directly to power amp or active speakers
  • 24-bit/96kHz driverless USB Audio 1.0
  • 24-bit/192kHz USB Audio 2.0 with ASIO or kernel streaming modes
  • Asynchronous USB transfer for very low jitter
  • Selectable digital filters - linear phase, minimum phase and steep
  • Balanced XLR audio output and RCA phono output
  • Two 24 bit digital inputs (with optical or coaxial for each)
  • External input for optional BT100 Bluetooth receiver - allows audio to be streamed and up-sampled from any paired Bluetooth device
  • Supports high quality apt-X Bluetooth CODEC as well as standard SBC Bluetooth CODEC
General Specifications
Digital to analogue converter Dual Wolfson WM8740 24-bit DACs
Digital filter Analog Devices ADSP21261 DSP; upsampling to 24-bit/384kHz
Analogue filter 2-Pole Dual Differential Bessel Double Virtual Earth Balanced
Frequency response 20Hz to 20kHz (±0.1dB)*
THD @ 1KHZ 0DBFS <0.001% 24-bit
THD @ 1KHZ -10DBFS <0.001%
THD @ 20KHZ 0DBFS <0.002%

Signal to noise ratio


Total correlated jitter


Crosstalk @ 1KHZ

< -130dB

Crosstalk @ 20KHZ

< -112dB

Output impedance

<50 Ohms

Max. Output Level (Unbalanced)

2.1V rms

Max. Output Level (Balanced) 4.2V rms (2.1V per phase)

Digital input word widths supported


Digital input sampling frequencies supported 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz**, 192kHz
Audio output upsampling Fixed 24-bit/384kHz
Max. power consumption 12W
Colour Black or silver
Dimensions (WxHxD) 52 x 215 x 191mm; (2.0 x 8.6 x 7.6”)
Weight 1.2kg/2.6lbs
Headphone Output
THD at 1kHz 0dBFS 24-bit signal with 22kHz low pass filter = 0.001% at 20khz 0dBFS 24-bit signal with 80kHz low pass filter = 0.003%
S/N -111dBrA
Frequency Response 10Hz - 100kHz

Recommended Headphone Impedance

32 Ohm to 600 Ohm

Customer Reviews

In the same category