
Australian sourced stock, with full local warranty.
Description
- Equipped with 4-pin XLR balanced output
- Audio-grade capacitor
- Highly precise crystal with low phase noise
- Playback 24bit/192kHz PCM and 11.2MHz DSD audio
- High performance DAC (Barrbrown PCM1792A)
- Asynchronous transfer up to 192kHz/24bit compatible with USB Audio 2.0
- HI/LO Gain selection (10dB) for wider selection of headphones
- Digital Filter selecting Roll-Off characteristics and Cut-off frequencies
Input |
|
[USB] terminal | |
Interface |
USB 2.0 Hi Speed |
Sampling Frequencies |
PCM 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz DSD 2.8MHz, 5.6MHz, 11.2MHz |
Quantization |
16bit, 24bit |
[Digital In] terminal | |
Connector | Optical, Square |
Format | S/PDIF |
Sampling Frequencies | 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
Quantization |
16bit, 24bit |
Output |
|
[PHONES BALANCED] terminal | |
Connector |
XLR (4-pin) |
Maximum output |
300mW or more (32 ohm) |
Load impedance |
16 - 600 ohm |
THD |
Less than 0.04% (at 1kHz) |
Frequency Response |
20Hz - 80kHz (+-3dB, 32 ohm, 100mW) |
[PHONE UNBALANCED] terminal | |
Connector |
1/4" stereo jack |
Maximum output |
150mW or more (32 ohm) Applicable load impedance :16 - 600 ohm |
THD |
Less than 0.04% (at 1kHz) |
Frequency Response |
20Hz - 80kHz (+-3dB, 32 ohm, 100mW) |
[OUTPUT] (L,R) Terminal (Analog output) |
|
Connector |
RCA Pin |
Reference output level |
2Vrms (0 dBFS) Applicable load impedance :less than 10k ohm THD :less than 0.01% (at 1kHz) |
Frequency Response | 20Hz-80kHz (+3dB) |
[DIGITAL OUT] terminal |
|
Connector | Optical (square) |
Format | S/PDF |
Frequency Response | 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz |
Quantaization | 16, 24bit |
General Specifications |
|
[microSD] card slot (for firmware upgrade only) Format: | FAT32 |
Compatible card | microSD card (SDHC), up to 32GB |
- Fostex HP-A4BL Converter and Headphone Amplifier
- 1x USB cable (1 metre)
- 1x AC adapter
- 4x Rubber feet
- 1x Owner's manual