Australian sourced stock, with full local warranty.
Magni 3+ and Magni Heresy raise the bar even higher for affordable headphone amps, with by far the highest output power in their price class–at least 200% higher than any competitor. At the same time, they provide the cleanest measured performance of any Magni, ever. Go ahead. Compare these new Magnis to anything out there at the price, and we think you’ll agree: there’s really no competition.
Not Just a “Starter Amp”
Either Magni 3+ or Magni Heresy are all the amp you’ll ever need, for any headphone. They both have the power, performance, low noise, and versatility to meet all your needs. You’re set from IEMs to hard-to-drive planar designs. With a full 2400mW into 32 ohms, either Magni has tremendous power reserves. Combined with low distortion, an exceptionally low noise floor, and switchable gain, both Magnis perform far beyond their price.
Your Choice: High Performance…or Even Higher
For Magni 3+, we pulled out all the stops in designing the highest performing discrete Magni ever, by any metric—power, distortion, or noise floor. But it’s easy to get even higher measured performance from integrated (op amp) designs, so we decided to give you a choice, with Magni Heresy.
Choose Magni 3+ for the ultimate expression of an affordable all-discrete current-feedback headphone amp. It’s now seriously like a mini speaker amp, right down to the driver stage and Vbe multiplier. Magni 3+ is in our traditional silver and gray chassis.
Choose Magni Heresy for insanely great measurements from an all-op-amp based headphone amp that uses super high quality parts, including a multiple paralleled output stage with feedforward. Magni Heresy is in a black and red chassis.
Both amps sound fantastic. You really can’t make a wrong choice.
Versatility Comes Standard
Both Magnis include preamp outputs. This means you can connect either one to your desktop powered monitors for a complete system—or even connect it to a speaker power amp and use it as a preamp. With its built-in time-delayed start-up and instant shut-down, there’ll be no glitches or pops through either headphones or speakers, either.
- Magni 3+ has tremendous power reserves, low distortion, an exceptionally low noise floor, and switchable gain
- Includes preamp outputs that you can connect to your desktop powered monitors for a complete system, or to a speaker power amp and use it as a preamp
- With its built-in time-delayed start-up and instant shut-down
- Designed and Built in California
|Maximum Power 16 ohms||2.8W RMS per channel|
|Maximum Power 32 ohms||2.4W RMS per channel|
|Maximum Power 50 ohms||1.6W RMS per channel|
|Maximum Power 300 ohms||410mW RMS per channel|
|Maximum Power 600 ohms||215mW RMS per channel|
|Crosstalk||Less than -70dB, 20 Hz-20 kHz in either gain|
|Output Impedance||Less than 0.2 ohms at either gain|
|Input Impedance||25k ohms|
|Gain||1 (0db) or 5.5 (15db), selectable via rear switch|
|Topology||Fully discrete, fully complementary all-bipolar, symmetrical current-feedback design with driver stage and Vbe multiplier, no capacitors in the signal path and DC servo|
|Protection||Standard failsafe DC power input and muting relay|
|Power Supply||“Wall wart” style 24VA 14VAC transformer, regulated +/- 16V rails with over 6,000uF filter capacitance|
|Size||5 x 3.5 x 1.25”|
|High Gain||Less than 0.0013% (-98dB) at 1V RMS into 32 ohms|
|Low Gain||Less than 0.0005% (-106dB) at 1V RMS into 32 ohms|
|High Gain||Less than 0.01% (-80dB) at 1V RMS into 32 ohms, CCIF|
|Low Gain||Less than 0.002% (-95dB) at 1V RMS into 32 ohms, CCIF|
|High Gain||Greater than 104dB, A weighted, referenced to 1V RMS|
|Low Gain||Greater than 115dB, A weighted, referenced to 1V RMS|
- Schitt Audio Magni 3+
- Battery packs