$799.00 RRP $1,719.00
*Please check with our online customer service team or your local store for stock availability
Introducing Elegia, the first closed-back headphone from Focal. Featuring a driver with a copper voice coil and a dedicated surround, the Elegia provides an intimate sound bubble of absolute sound, even in a noisy environment.
AN EXCLUSIVE SPEAKER DRIVER
Whether it’s the motor, the voice coil, the surround or the dome, Focal has once again chosen skilfully created, cutting-edge technologies, developed and assembled in its own workshops to put the very best into these innovative circum-aural closed-back headphones.
Elegia incorporates a new generation of exclusive and low compliance electrodynamic transducers, capable of operating in a small inner environment, whilst ensuring exceptional dynamics, a linear, extended frequency response of 23 kHz and the most precise sound reproduction. Just like the construction of the Elear, Clear and Utopia speaker drivers, Elegia is fitted with a dedicated surround, this time of 110 microns: the geometry of this new, half-roll NBR surround guarantees a lightweight moving part that is always under control, even at the lowest frequencies and the highest volumes.
The frameless copper voice coil (exclusive to Focal), measuring 4 mm high, is also very lightweight in relation to the traction capacity of the moving part: as such, the signal is reproduced perfectly.
Finally, exceptional headphones deserve an exceptional dome. The M-shaped inverted dome, a major innovation in open-back headphones, is also used for Elegia. Made from an aluminum/magnesium alloy, this dome offers an ideal combination of lightness, high rigidity, and excellent damping. Its "M"-shape gives it a larger emissive surface area for a sensational listening experience. Finally, when combined with portable source equipment, Elegia guarantees remarkable listening quality thanks to its low impedance of just 35 Ohms. This promotes mobility, without scrimping on technological performance.
FRONT BAFFLE DESIGN
The stereophonic image is one of the most critical points when it comes to headphones. Indeed, its reproduction is much easier through a pair of speakers, since this exercise is mainly to define the correct spacing between the left and right speakers, determine the listening position and to adjust the orientation of the speakers. Traditionally, the principle of the equilateral triangle is a good place to start.
However, this is much more complex when it comes to approaching this point when designing headphones, as the distance between the right and left speakers is far more critical than the distance of the speakers in relation to the ears.
To promote the best possible stereo image, Focal has developed a single front speaker to position the speakers as far forward as possible from the listening position. The limit here is not to have too much space between the speakers and the ears to ensure the best dynamics and an ideal tonal balance on the entire audio spectrum.
SPEAKER DRIVER DESIGN
The first task in designing a closed-back headphone was to define a new generation of transducer. It had to be capable of operating at a low volume while maintaining exceptional dynamics, delivering an extremely extended frequency response, and reproducing the subtlest sound details. Thanks to the knowledge acquired while designing Utopia, Focal made significant progress in simultaneously managing the bass level and its degree of control.
The Elegia utilizes a dedicated surround, constructed in the same way as the Elear, Clear and Utopia speaker drivers. It is constructed from the same material at a thickness of 110 microns. The geometry of this new half-roll NBR surround was the subject of an extremely detailed study on how to gain optimum control of the moving part, even at the lowest frequencies and loudest volumes.
The need for more magnetic flux for increased speaker driver control led to the design of a brand new copper wire, working inside a very high-performance N50 grade neodymium motor. The magnetic damping curve highlights the significant advantages inherent in this perfectly formed relationship.
The very low QES provides excellent electrical damping, over the entire travel of the moving part. The signal is, therefore, reproduced without additions, losses and any dynamic compression across the entire spectrum.
The aluminum-magnesium alloy dome used for Elegia uses the same materials and geometry as those developed for the Clear headphones. It offers an ideal combination of lightness, high rigidity, and excellent damping. As such, the dome still works by piston-effect and is free from mechanical distortion. The M-shape of the dome permits a larger emissive surface area, enabling even greater maximum SPL. At the same time, this choice results in the ideal coil positioning for optimum mechanical coupling.
In short, the moving part is always under control and has maximum acceleration capacity, key to reproducing subtle sound details. The filtering carried out downstream will be decidedly minimal, favoring a dynamic and highly accurate reproduction of the original audio signal. Developing the transducer in this way provides an extended frequency response of 23 kHz.
The ear cup features a vent inside the logo with a specially designed geometry to prevent any phenomena of dynamic compression and turbulence inside it. The progressive design enables dissipation of the lowest frequencies without disruption.
higher frequencies, these are absorbed through an EVA foam pad inside the ear cup, behind the speaker driver. Finally, acoustic diffusers fitted inside the ear cup break-up the standing waves and spread the residual energy homogeneously through the overall space.
The Elegia earpad provides excellent soundproofing against the external environment, whilst benefiting from an excellent ratio between damping and diffusion, all within a tiny listening space. Although the microfibre earpads are the same as those on the Clear headphones, Elegia’s are unperforated, which provides better soundproofing. This generates extreme performance with the most direct radiation possible from the speaker driver to the ear, without the usual artifices (foam around the transducer, etc.), for optimal dynamics and sound whose naturalness is noticeable from the very first seconds of listening.
1 carrying case (9.8" x 9.4" x 4.7")
1 four-feet (1.2m) OFC 24 AWG cable with asymmetrical 3.5mm TRS Jack connector
3.5mm female Jack adaptor - 6.35mm male
High-end closed-back headphones for home and on-the-go use
Exclusive full-range speaker drivers with an M-shaped aluminum/magnesium dome (patent pending)
Incredible tonal balance, reproduction of the tiniest sound details at both very high and very low frequencies
Excellent performance when connected to a portable audiophile player
Very good ambient noise soundproofing
Comfortable and ergonomic