Australian sourced stock, with full local warranty.
Sequel is so much more than a step-up model from the Volvere. With a touch of high-end engineering finesse, the already robust chassis and structure benefit from a bespoke suspension system, bearing and platter.
Following our policy of continuous improvement, upgrades to power supply and motor which we developed for our Acutus Reference model have also been applied here, using the same principles of DSP signal generation to reduce vibration and allow fine calibration of motor speed.
The twin belt drive and revised bearing makes the improvement in sound quality instantly noticeable over the Volvere.
Additionally our new improved stronger main chassis now integrates the arm cable management.
Building upon the strengths of the standard Volvere model, the presentation is dramatically focussed and paints a vividly realistic image of the recording.
Aside from the superlative audio performance, the Sequel is one of the more aesthetically pleasing models in the world of high-end turntables and a worthy centrepiece for any domestic hi-fi system.
- Bespoke suspension system, bearing and platter
- Twin belt drive
- Stronger main chassis now integrates the arm cable management
|Drive||Twin Belt drive|
|Speeds||33.3 and 45.0 RPM|
|Platter mass||6.7 Kg|
|Bearing||Inverted stainless steel|
|Thrust point||Tungsten carbide/Sapphire|
|Suspension||3 Point, Springs in Vertical, O-Rings in Lateral Frequency; Vertical 2.5 Hz (variable), Lateral 4.5 Hz|
|Tonearms||Standard Cut for SME (adapters to order)|
|Motor||Hand built 24v 140mNm ac synchronous|
|Power supply||DSP Vari-Speed control unit|
|Voltage input||100-240vac 50/60Hz 20 watts max. (depending on region)|
|Dimensions||Turntable (overall) 425 x 370 x 205mm (WxDxH)|
|Dimensions||Turntable (footprint) 375 x 325mm (WxD)|
|Dimensions||P.S.U. 250 x 215 x 95mm (WxDxH)|
|Net weight||12.6Kg (28lb) turntable only
3.5Kg (8lb) psu only
|Packaging||460 x 480 x 510mm (WxDxH)|
|Shipping weight||21.0kg (47lb)|
- AVID Sequel SP Turntable
- 1x Instruction Manual
- 1x Platter
- 1x Sub-Chassis
- 1x Clamp
- 1x Main Chassis
- 1x 4mm Tungsten Carbide Ball
- 2x Drive Belt
- 1x Main Bearing
- 1x Power Supply
- 1x Power Supply Connecting Cable
- 3x Suspension Lateral O-ring
- 1x Wrench Key Size 3mm A/F
- 1x Belt Pin
- 1x Power Cord