Bryston B60R Integrated Stereo Amplifier

Bryston

The challenge: to design an integrated audio amplifier with none of the compromises usually associated with this approach. Our design team has surpassed the challenge. The B-60 provides 60 watts per channel at 8 ohms and 100 watts per channel at 4 ohms.

  • There are provisions for four high level inputs, (CD, Tuner, Video and Aux) in addition to one tape loop and a pre-out/main-in feature. A headphone jack is provided for those requiring monitoring and private listening provisions. An optional motor driven volume remote control is also available. This motorized volume approach ensures the lowest possible distortion of the audio signal.

    The B60R is an integrated audio amplifier which has been built to not only equal, but surpass the parameters of the most demanding material available. It has been designed with pre-out/main in connectors in order to allow independent use of the preamplifier or stereo amplifier section within an audio or video system.

  •  

    • Inputs: 4x RCA single ended pairs (CD, tuner, video and aux), SPDIF (RCA)*
    • Outputs: RCA single ended (tape loop, pre-out/power In), speaker terminals, ¼” stereo headphone jack
    • 60W into 8 Ohms (100W into 4 Ohms)
    • Gold plated switch, contacts, and connectors
    • Pre-out and main in connectors allow separate use of preamplifiers and power amplifiers, or to facilitate inter-state signal processing

     

  •  

    • Frequency Response: 20Hz - 20kHz +/- .05dB
    • Maximum Output: 15 volts
    • IM or THD: Less than 0.005% at 3 volts out
    • High Level Sensiti vity: 500mV
    • Rated Noise: Ref. 500mV / 20-20kHz - 100dB
    • 60 watts per channel, 8 ohms
    • 100 watts per channel, 4 ohms
    • Harmonic Distortion: Less than 0.01% from
    • 20Hz to 20kHz at 60 watts
    • IM Distortion
    • Less than 0.01% from
    • 10 milliwatts to 60 watts
    • Noise: 106dB below full output