Clear Audio Nano Phono V2 Amplifier

Clear Audio

The Nano Phonophonostage isn't ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.

  • Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.

    • The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity
  • Amplification @ 1 kHz: 34 dB to 48 dB (MM mode)
    54 to 68 dB (MC mode)

    Input impedance: 47 kOhm / 220 pF / MM mode
    Individual / User / MC mode
    MM / MC input: switchable by jumper (at bottom)
    Subsonic Filter: switchable by jumper (at bottom)

    RIAA: delay time: 75 μs / 318 μs / 3180 μs

    RIAA accuracy: ± 0.4 dB @ 20 Hz - 50 kHz

    THD: < 0,006% MC ("A" weighted @ 1 kHz / -1 dB @ Max)

    Headroom: 18 dB / MC

    Signal to noise ratio: 70 dB ("A" Weighted)
    81 dB ("A" Weighted)

    Channel separation: > 80 dB @ 1 kHz / opposed channel hot-wired

    Max. output voltage: 10 V eff. (1 kHz)

    Power supply: ± 18 V DC / 300 mA (external power supply)

    Input / Outputs: unbalanced (RCA)

    Power consumption: Max. consumption: 2.3 Watt

    Consumption in operation: 2.3 Watt

    Standby mode: < 0.3 Watt

    Off mode: 0.0 Watt

    Total weight: 500 gram (Phonostage and power supply)