*Please check with our online customer service team or your local store for stock availability
The ZENSOR 5 AX is based on the technology of the ZENSOR 5. They share the same passive crossover, which is paramount for getting the characteristic ZENSOR sound quality. The build-in amplifier is integrated in the left speaker, while the right speaker is a passive ZENSOR 5 speaker.
Imagine a world where music just flows, where all you needed was a set of speakers. No complex electronics, no unwanted cables, no jumble of remote controls, nothing but pure uncomplicated enjoyment.
DALI ZENSOR AX series set you free from the electronics traditionally associated with a high quality audio experience. Both the stand mount and the floor standing model come complete with all you need. They require nothing extra, just connect the mains and you are ready to play.
The build in 2 x 50W stereo all digital amplifier delivers the audio signal to both loudspeakers and is designed to bring out the best from its ZENSOR host regardless of the signal type. You can use Bluetooth and Apt-X if your device supports it, you can connect an analogue source with a mini-jack or an optical via TOSLink.
The ZENSOR 1 AX is based on the technology of the ZENSOR 1. They share the same passive crossover, which is paramount for getting the characteristic ZENSOR sound quality. The build-in amplifier is integrated in the left speaker, while the right speaker is a passive ZENSOR 1 speaker.
Place the ZENSOR 1 AX on a shelf, on a stand, or mount it directly on the wall and start playing music via Bluetooth. Connect your TV via the optical input or any type of traditional audio player via the analogue input.
The ZENSOR AX series has all of the virtues of a traditional stereo system with none of the down sides.
|SOFT DOME TWEETER||With a clear heritage from our high-end series, the lightweight dome tweeter offers best in class resolution.|
|FULLY DIGITAL AMPLIFIER||The DALI ZENSOR AX has a build-in 2 x 50W stereo all digital class D amplifier that delivers the audio signal to both loudspeakers and is designed to bring out the best from its passive ZENSOR host regardless of the signal type.|
|CONNECTIVITY||Easy connectivity through a variety of sources e.g. Bluetooth and analogue input.|
|WOOD FIBRE CONES||This mix paper pulp and wood fibre makes the cones stiff and light which ensures that every micro detail in the signal is reproduced unfiltered.|
|Frequency Range (+/-3 dB) [Hz]||43 - 26,500|
|Maximum SPL [dB]||106|
|Crossover Frequency [Hz]||2,400 Hz|
|High frequency driver, Quantity||1 x 25 mm|
|High frequency driver, Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||2 x 5.25"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Enclosure type||Bass Reflex|
|Amplifier Type||Fully digital class D (Open loop type)|
|Input Impedance [ohms]||12.6k|
|Connection Input||3.5 mm mini jack
|Connection Output||SUB Out|
|Wireless Input(s)||Bluetooth™ Apt-X|
|Recommended Distance From Wall [cm]||20 - 80|
|Max. Power Consumption [W]||160W|
|Standby Power Consumption [W]||<0.5W|
|Dimensions With Base (HxWxD) [mm]||825 x 162 x 282|
Speaker Wire (For Right Speaker)
|Analogue Input Sensitivity [mV]||300|
|Continous IEC Amplifier Output [RMS watt]||2 x 50W|
|Max. Digital Resolution [bits/KHz]||24 / 96|
|Input Mains Voltage [Volts]||Universal mains 100 - 240V|