Australian sourced stock, with full local warranty.
Calling All Balanced Output Enthusiasts
Based on RC-WT1,the new RC-78B swaps the 3.5mm jack out for a 2.5mm 4-pole plug.With its separate Left/Right channel wires and separate +/- signal transfer,the RC-78B enables balanced operation for your earphones.When connected to a balanced headphone amplifier(such as the FiiO AM3),RC-78B can greatly enhance channel separation as well as markedly increase the signal to noise ratio.This results in a wider sound stage and more controlled,textured bass – perfect for balanced output enthusiasts.
A Little Extra Transparency makes for A Lot More Individuality
From the plug joint,to the Y splitter,to the earphone-side connector,the new RC-78B is wrapped with transparent polycarbonate to separate itself from the unicolor cable.Not only does this striking visual element give your earphones some character,it naturally also invites you to take a closer look with its revealing view of the insides.
Stunning Looks backed by Impressive Internals
The RC-78B adopts Teflon*FEP(fluorinated ethylene propylene) for the sheath and silver-plated copper as the conductor.11 strands of silver-plated copper wires (each with a diameter>0.08mm) make up each of the 8 separate cables,which are all woven into one audio cable with separate wires for the Left/Right channels.Both the straight 2.5mm plug and the CIEM connector (with a 0.78mm diameter) are made of gold-plated copper.These premium choices of materials ensure the RC-78B is a high quality cable that is highly elastic,tough against scrapes,and resistant to aging.
- Symmetrical Replacement Cable (4 Pin 2.5 mm jack plug) of sound quality Hervorrangenden features
- 120 cm Long, 26AWG pipe diameter, 2.5 mm Cable Diameter, Impedance 0,16ohm, Jack 2,5 mm 4-pin
- Compatible with Westone: UM3XRC/W4R, NF Audio: NF2/NF3/NF4, JH Audio: JH13/JH16, Earsonics: SM64
|Length||120cm (excluding the plug)|
|Diameter of conductor||26AWG (φ0.4mm)|
|Diameter of conductor including outer skin||φ0.6mm|
|Diameter of cable||φ2.5mm|
|Impedance of single channel for headphone cable||0.16Ω(1.2m)|
|High pressure resistance||150V|
|Diameter of contact pin||0.78mm|