NAD C275BEE Stereo Power Amplifier

NAD

The C 275BEE boasts many upgrades and refinements taken directly from the highly acclaimed NAD Masters Series M3 Amplifier

*DEMO UNIT ONLY*

  • These include application of Bjorn Erik Edvardsen's innovative and patented Distortion Canceling Circuit in the output stage and BEE Clamp in the power supply. A carefully engineered PCB layout has reduced distortion and noise to unprecedented levels. Taken together, these improvements mark a sharp upturn in performance that simply must be heard, to be fully appreciated!

    • 2 x 150W Continuous Power into 4 ohms and 8 ohms
    • 250W, 410W, 600W IHF Dynamic power into 8, 4 and 2 ohms, respectively
    • PowerDrive™ circuit
    • Holmgren Toroidal Power transformer
    • All discrete circuitry
    • Class A Voltage Stages
    • Distortion Canceling Circuit
    • BEE Anti-saturation Clamp
    • Short signal path from input to output
    • All sockets Gold plated
    • Soft Clipping™
    • ATOLogic 12 volt trigger/ signal sensing input
    • Detachable IEC Power Cable
    • <1W Standby Power Consumption
    • Free of lead and other environmentally dangerous substances
  • Continuous output power into 8Ω >150W (ref. rated THD, and 4Ω (both channels driven) 20Hz – 20kHz)

    Continuous output power into 8Ω >330W (ref. 20Hz - 20kHz,(Mono, Bridge mode) <0.02% THD)

    Rated THD: (250mW to rated power, CCIF IMD, DIM 100) <0.008% (ref. 20Hz - 20kHz)

    Clipping power: (4Ω and 8Ω) >170W (ref. 1kHz 1% THD)

    IHF dynamic power:
    8Ω 250W
    4Ω 410W
    2Ω 600W

    IHF dynamic power (Bridge mode):
    8Ω 800W
    4Ω 1200W

    Peak output current: >50A (ref. 1Ω, 1ms)

    Signal/Noise ratio: >102dB (A-weighted, ref. 1W) >123dB (A-weighted, ref. 150W)

    Damping factor: >180 (ref. 8Ω, 50Hz and 1kHz)

    Frequency response: ± 0.1dB (ref. 20Hz - 20kHz)
    3Hz - 100kHz (ref. -3dB)

    Input impedance: (Fixed IN) 10kΩ + 200pF

    Input impedance: (Variable IN) 100kΩ + 100pF

    Input Sensitivity: 1.2V (ref. rated power)

    Voltage gain: 29dB

    Minimum input level for AUTO TRIGGER: 10mV at 1kHz

    Time to power OFF at no signal in AUTO mode: <10 minutes

    Power Consumption

    Normal operation: 312W (ref. 230V AC 50Hz; 120V AC 60Hz)

    Standby power: <1W

    Idle power: <100W

    Dimension and Weight

    Dimensions: (W x H x D): Net 435 x 133 x 352mm Gross 435 x 150 x 396mm

    Net weight: 32.2 lbs (14.6 kg)

    Shipping Weight: 37.3 lbs (16.9 kg)