Australian sourced stock, with full local warranty.
Experience the ultimate in home theatre performance and versatility with the MX-A5200 AVENTAGE power amplifier. The 11-channel system exemplifies the pursuit for purity of sound and unsurpassed flexibility.
AVENTAGE Separate Components
AVENTAGE Separate Components represent the pinnacle in exhilarating home entertainment. In pursuit of the ultimate in home cinema, Yamaha establishes a new benchmark in performance and innovation. Introducing the CX-A5200 pre-amplifier and MX-A5200 power amplifier.
Power and Presence
The MX-A5200 offers 11 x discrete channels of amplification with flexible configuration options - delivering an impressive combination of power and quality. Enjoy the flexibility of a multi-zone system or immerse yourself in exhilarating surround sound using any combination of 11-channels.
Ultimate Performance with BTL
To further enhance power capacity, the MX-A5200 supports Bridge Tied Load (BTL) configuration for the front 2 channels. This allows for a major improvement to the front speaker performance.
As part of its uncompromising design, the MX-A5200 boasts a specially designed chassis to maximise rigidity and eliminate the effects of vibration. The MX-A5200 employs a double bottom construction consisting of vibration control plates made of 1.6 mm steel - echoing that of the legendary Z11 AV receiver. In order to support the heavy heat sinks and other components, a left-right independent construction strengthened by a rigid-frame structure is utilised. The bottom frame reduces the transmission of vibration produced by the large power supply transformer and heat sinks. The MX-A5200 also incorporates a heavy insulator that blocks external vibration.
Precisely planned, circuit-routed and designed with a symmetrical power amplifier layout, the MX-A5200 achieves ideal channel separation with left and right sides being both physically and electrically isolated. The design also greatly improves signal-to-noise ratio and achieves an expansive sound stage.
The MX-A5200 utilises a high-output, large toroidal transformer combined with 2 specially developed high-capacity block capacitors to deliver massive power with generous headroom. Also, energy loss is minimised and ensures effortless reproduction of sound sources.
The rear of the MX-A52000 features high-quality, gold-plated terminals that are compatible with Y plugs (spade connectors) for optimal connections with speakers.
Heavy-duty Bottom Plate
Stabilising the chassis is the key to enhanced performance and deep, sinking sound. The MX-A5200 achieves this by employing a thick bottom plate which acts to steady the entire structure and achieve optimal sound.
Balanced XLR Connections
When connecting AV components, electrical noise can be introduced - a result of the connections between them and also from other sources of external noise. To combat this inherent issue, the MX-A5200 utilizes balanced connections for all 11-channels - the same type found in professional audio applications. Additionally, the alternative RCA unbalanced connection uses a ground sensing transmission method that achieves simple balanced transmission.
- High output/high audio-quality amplifier (150 W x 11 channels)
- Balance and unbalanced connections are supported
- Chassis structure that maximizes the potential of the unit's performance
- Freedom for speaker placement
- Support for bi-amp connections/ bridge connection and multi-speaker playback
- Switch the unit's power from your pre-amplifier (trigger function)
|Rated Output Power (1kHz, 1ch driven)||290 W (4 ohm, 0.9% THD [European Model]), 230 W (6 ohm, 0.9% THD), 190 W (8 ohm, 0.9% THD)|
|Rated Output Power (1kHz, 2ch driven)||170 W (8 ohm, 0.9% THD)|
|Rated Output Power (1kHz, 2ch driven, bridged connection)||240 W (8 ohm, 0.9% THD)|
|Rated Output Power (20Hz-20kHz, 2ch driven)||170 W (6 ohm, 0.06% THD), 150 W (8 ohm, 0.06% THD)|
|Rated Output Power (20Hz-20kHz, 2ch driven, bridged connection)||200 W (8 ohm, 0.06% THD)|
|Maximum Effective Output Power (1kHz, 1ch driven) (JEITA)||280 W (6 ohm, 10% THD), 230 W (8 ohm, 10% THD)|
|Dynamic Power per Channel (8/6/4/2 ohms)||190 / 250 / 350 / 500 W|
|Digital ToP-ART / High Current Amplification||Three-stage Darlington Power Stage|
|Current Feedback Amplifier Circuit||Yes|
|Analog Audio Input/Output||XLR Balance: 11 / 0, RCA Unbalance: 11 / 0|
|Standby Power Consumption (IR only)||0.1 W (typical)|
|Auto Power Standby||Yes (ON / OFF switch)|
|Dimensions (W x H x D)||435 x 211 x 464 mm; 17-1/8” x 8-1/4” x 18-1/4”|
|Weight||26.4 kg; 58.2 lbs|
|Power Consumption||650 W|
- Yamaha Aventage MX A5200
- Power Cable
- System Control Cable