Turntable section |
|
Drive system |
Belt Drive |
Motor |
DC Motor |
Platter speeds |
33 1/3, 45 |
Rotation Speed Variation | +/–2% |
Wow and flutter |
0.2% |
Signal-to-Noise Ratio | 67dB or higher (A-weighted, 20kHz LPF) |
60dB or higher (unweighted, 20kHz LPF) | |
Platter | Aluminum Die-cast |
Diameter of Platter | 12", 300mm |
Tonearm section |
|
Type | Static Balance, Straight |
Effective Arm Length | 8.8", 223.6mm |
Stylus Pressure Range |
0 to 4g |
Supported Cartridge Weight |
3.5 bis 6.0g |
Overhang |
18.6mm |
Anti-skating Adjustment |
Supported |
Cartridge section |
|
Type |
MM Audio-Technica AT-95E |
Stylus Construction |
Bonded Diamond |
Frequency Response |
20Hz to 20kHz |
Channel Seperation | >18dB |
Channel Balance | 2.5dB |
Vertical Tracking Angle | 20 degrees |
Supported Load Impedance | 47k ohms |
Output Voltage | 2.5mV (1kHz, 3.54cm/sec.) |
Stylus Pressure | 2.0g +/–0.5g |
Cartridge Weight | 5.7g +/–0.5g |
Head-shell Weight | 11g (including Screws, Nuts and Wires) |
Analog Output |
|
Connector | RCA Pin jack (Gold-plated) |
Power | AC 100 to 240V, 50/60Hz |
Power Consumption | 1.5W (less than 0.5W at Standby) |
Overall Dimensions (W x D x H) | 420 x 355x 141mm |
Weight | Approx. 3.9 kg |