Australian sourced stock, with full local warranty.
Go ahead. Do things with Valhalla 2 that you’d never attempt with other OTL tube amps. Run low-impedance headphones. Use IEMs. Valhalla 2 is a complete re-imagining of Valhalla, with improved performance, higher output capability, lower distortion and output impedance.
Tubes Made Flexible
While most tube OTL amps are really only designed for 300 ohm Senns and 600 ohm Beyers, Valhalla 2 stretches to include headphones that you’d never expect to use with a tube amp. Go ahead. Use it with Grados. Run it with AKGs. Rely on it for many IEMs. You may even like it with high-efficiency planars like LCD-X, LCD-XC, Oppo PM-1 and HE-400.
A Complete Desktop Preamp
Valhalla 2 also adds two important features: preamp outs and a gain switch. Preamp outs let you connect your powered monitors directly to Valhalla 2, to give them some of what some people call “tube magic.” The gain switch gives you better control of both output level and impedance, for better matching to your headphones. It's easy to build a complete desktop system around the Valhalla.
Not Your Father’s Tube Amp
If you’re expecting syrupy, tubby, euphonically colored tube sound, you’re in for a shock. Valhalla 2 is exceptionally accurate, neutral, and resolving, without being strident or etched.
Designed and Built in California
By “made in USA,” we mean made in USA. The vast majority of the total production cost of Valhalla 2—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our board house is 20 minutes away from our office in Newhall. Our chassis guys are just over the hill in the Valley.
Valhalla 2 is covered by a limited warranty that covers parts and labor for five years. That’s 5 years. Yes. FIVE. Which is up to 5X that of our competition, if you weren’t so hot at math. Note the marketing weasel-wording “up to.” One exception: the tubes. Those we cover for 3 months.
15-Day Satisfaction Guarantee
Try Valhalla in your own house for 15 days. If you don’t like it, simply send it back for a refund, minus a 5% transaction fee. Try spending 15 days in an audio store. They’ll kick you out. Unless you buy them donuts. Maybe.
- Improved performance, higher output capability, lower distortion and output impedance
- Preamp outs and a gain switch
- Volume control adjusts the preamp outputs
- Made in USA
20Hz-20Khz, -0.1db, 7Hz-200KHz, -3dB
Maximum Power, 50 ohms
Maximum Power, 300 ohms
|Maximum Power, 600 ohms||450mW|
|THD||< 0.04%, 20Hz-20KHz, at 1V RMS, high gain (worst case)|
|IMD||< 0.05%, CCIR at 1V RMS, high gain (worst case)|
|SNR||> 97db, unweighted, referenced to 1V RMS, low gain|
|Crosstalk||< -71dB, 20 Hz-20KHz|
|Output Impedance||14 ohms (hi gain), 3.5 ohms (lo gain)|
|Gain||7 (16.9db) or 1.5 (3.5 db), via rear switch|
|Topology||All-triode, noninverting, single voltage gain stage, current source biased front end and optimized WCF output stage, DC-coupled input|
|Tube Complement||6N1P dual triode input, 6N6P dual triode output, 1 each per channel. 6N1Ps rollable to 6DJ8, E88CC, 6922, 6BZ7, and similar types.|
|Power Supply||Two internal power transformers with over 2,000uF of filter capacitance|
|Size||9 x 6 x 3.25”|
|Warranty||Headphone Amplifier (60 Months)|
|Tubes (90 Days)|
- Schiit Audio Valhalla 2 Headphone Amplifier
- Power cord
- 4 x Stick-on feet