Australian sourced stock, with full local warranty.
Saga+ gives you all the uber-high-end, no-compromises features you need in a preamp—without the insane price. Saga+ brings you a real relay-switched volume control, which you can use in pure passive mode, or run it through a 6SN7 hybrid tube buffer. Saga+ even includes a custom remote control.
Saga+: Easiest Relay-Switched Volume, Ever
The benefits of a relay-switched stepped attenuator for volume are clear. Compared to a potentiometer, they give you essentially perfect channel matching and near-unmeasurable distortion. However, some preamps with relay-stepped attenuators confuse you with buttons and screens. Not Saga+. Saga+ has a volume knob that works just like a volume knob—just grab and turn. And if you use the remote control, the motorized potentiometer changes to match the remote setting.
It’s Your Choice: Passive or Active
Go ahead. Run Saga+ in passive mode for a convenient remote-controlled passive preamp that’s ideal for many systems. If you need to drive long cables, switch it to the hybrid tube buffer—a serious buffer running on 200V rails with vanishingly low distortion.
Perfect Companion to Our DACs
Want a remote-controlled system to interface your digital gear with the rest of your system? Stack Saga+ and Bifrost (or any other of our DACs) for a true no-compromise remote-controlled system.
Designed and Assembled In USA
By “designed and assembled in USA" this is what we mean: the vast majority of the total production cost of Saga+—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal.
- Ultra-high-end preamp
- Stepped attenuator volume control
- Can be run fully passively—or connected to a unique hybrid 6SN7 tube buffer
- Designed and Built in California
Hybrid Tube Buffer Stage
|Frequency Response||20Hz-20Khz, -0.2db, 3Hz-200KHz, -3dB|
|THD||<0.001%, 20Hz-20KHz, at 1V RMS|
|IMD||<0.001%, CCIR (active stage)|
|SNR||>108db, A-weighted, referenced to 1V RMS|
|Output Impedance||180 ohms|
|Maximum Output||>10V RMS|
|Output Impedance||Varies, maximum 4.8 kohms|
Both Passive or Active Stage
|Gain||Approximately 1 (0dB) through either passive or active stage|
|Input Impedance||10 kohms|
|Inputs||5 RCA pairs, selectable via front switch or remote|
|Outputs||2 RCA pairs, selectable via front switch or remote|
|Buffer Stage||Hybrid push-pull tube-BJT buffer stage with equalized transconductance|
|Volume Control||Relay-switched stepped attenuator with discrete thin-film resistors , 64 1dB steps|
|Power Supply||One 24VA transformer with regulated +/-100V rails, plus 6.3VDC heaters and 5VDC for microprocessor|
|Power Consumption||25W typical|
|Size||9"W x6"D x 2"H, plus additional 1.25" H for tube|
|Warranty||Saga + Stereo Pre-Amplifier (60 Months)|
|Tubes (90 Days)|
- Power cord
- 6N8S or 6SN7 tube