Turntable section |
|
Drive system |
Belt Drive |
Motor |
DC Motor |
Platter speeds |
33 1/3, 45 |
| Rotation Speed Variation | +/–2% |
Wow and flutter |
0.2% |
| Signal-to-Noise Ratio | 67dB or higher (A-weighted, 20kHz LPF) |
| 60dB or higher (unweighted, 20kHz LPF) | |
| Platter | Aluminum Die-cast |
| Diameter of Platter | 12", 300mm |
Tonearm section (Aluminum Tube) |
|
| Type | Static Balance, Straight |
| Effective Arm Length | 8.8", 223.6mm |
Stylus Pressure Range |
0 to 4g |
Supported Cartridge Weight |
3.5 bis 6.0g |
Overhang |
18.6mm |
Anti-skating Adjustment |
Supported |
Cartridge section |
|
Type |
MM type (Audio-Technica AT3600) |
Stylus Construction |
Bonded Diamond |
Frequency Response |
20Hz to 20kHz |
| Channel Seperation | >18dB |
| Channel Balance | 2.5dB |
| Vertical Tracking Angle | 20 degrees |
| Supported Load Impedance | 47k ohms |
| Output Voltage | 2.5mV (1kHz, 3.54cm/sec.) |
| Stylus Pressure | 3.5g +/–0.5g |
| Cartridge Weight | 5g +/–0.5g |
| Head-shell Weight | 10g (including Screws, Nuts and Wires) |
Analog Output |
|
| Connector | RCA Pin jack (Gold-plated) |
| Power | AC 100 to 240V, 50/60Hz |
| Power Consumption | 1.5W (less than 0.5W at Standby) |
| Overall Dimensions (W x D x H) | 420 x 355x 121mm |
| Weight | Approx. 3.9 kg |
