Sound quality design based on the latest acoustic engineering and psychoacoustic research results. A product that can be said to be a new standard for complete wireless earphones.
Equipped with a newly designed driver "f-Core for Wireless" that achieves ultra-low distortion
Excellent audio equipment, amplifiers and other electronic equipment have an extremely low distortion of about 0.0001%. On the other hand, the distortion generated by the driver unit (speaker part) inside the earphone is 1% or more in the low range even with excellent products. In other words, it can be said that a distortion of 10,000 times or more is generated in the process of converting the electrical signal into sound in the driver unit (speaker part) of the earphone. If this distortion can be greatly reduced, sound quality will improve dramatically. In addition, true wireless earphones often rely heavily on software equalizers to adjust the sound quality, and as a result, the sound quality tends to be easy to get tired of listening to. With the ZE2000, the basic performance of the driver unit has been enhanced, and acoustic sound quality adjustment using the acoustic space inside the housing of the earphone has been adjusted so that the sound quality can be fully satisfied without an equalizer. On top of that, we perform extremely effective correction that only an equalizer can do, such as reducing the sound pressure in a narrow band with pinpoint accuracy. However, in order to make effective use of this equalizer adjustment, a driver unit with extremely high precision sound pressure frequency characteristics is required. If there is a variation of about 3 dB, which is a general accuracy, correcting with an equalizer will rather produce unnatural results.
In order to solve the above distortion and accuracy problems, we have developed a newly designed "f-Core for Wireless" that has been redesigned from scratch. In general, the diaphragm of an earphone is made of a resin film integrally molded with the edge. A tangential edge is formed on the diaphragm because it requires a front-to-rear amplitude. It added movement and caused distortion. "f-Core for Wireless" uses a special resin that combines lightness and hardness for the diaphragm. The edges around the diaphragm are made of a special, extremely flexible silicon that provides smooth, distortion-free diaphragm amplitude. By separating the edge and the diaphragm, we have achieved a diaphragm area equivalent to a 9mmφ driver unit that uses a tangential edge, even though it is 6mm in diameter, and has reduced the amount of amplitude. This point also contributes to the reduction of distortion. In addition, the special silicon edge and diaphragm are directly heat-compressed to dramatically improve assembly accuracy and minimize variations between drivers. In addition, since no adhesive is used for the diaphragm, the weight is greatly reduced, contributing to the reduction of distortion.
"f-LINK damping mechanism" that optimizes the internal pressure of the housing
Completely wireless earphones require a high density of batteries, electronic boards, antennas, etc. As a result, the degree of freedom to adjust the sound quality by acoustic means is low, and we have no choice but to create sounds under strict constraints. In addition, since waterproof performance is required for completely wireless earphones, vents (vents) that optimize the pressure of the acoustic space inside the earphone housing cannot be opened outside the housing. As a result, typical true wireless earphones without vents have too much low end and are forced to emphasize high end to balance it out. As a result, not only does it create a flashy sound that emphasizes both the low and high frequencies, but it also tends to lose its naturalness, such as vocals becoming distant.
The ZE2000 is equipped with a newly developed "f-LINK damping mechanism" that optimizes the pressure in the acoustic space inside the housing of the earphone and enables an acoustic design equivalent to that of wired earphones without venting to the outside of the housing. I'm here. This makes it possible to properly control the low range, which was difficult to achieve with the sound quality design of a completely wireless earphone, and reproduce vocals that tend to be far away with the balance intended by the artist. In addition, the low-frequency reproduction of drum kicks and bass lines, combined with the ultra-low distortion of the driver unit, achieves a high quality that allows you to feel the subtle dynamics in the bass.
Supports codec aptX™Adaptive for high sound quality and low latency
In addition to SBC and AAC codecs, it also supports aptX™, which offers high sound quality without interruption. Compatible with a wide range of iPhone and Android models, pairing is easy. Furthermore, it supports 48kHz/24bit wireless transmission with Qualcomm® aptX™ Adaptive codec.
A feeling of wearing that seemed to be customized
The ZE2000 is based on the housing design, which is the optimal solution for IEMs established in wired earphones so far, and achieves a better fit. Whether or not the earphones are comfortable to wear depends on how little pressure is felt. At first glance, the method of holding with the repulsive force of silicon, such as selecting an organic shape that promotes ergonomics, seems correct, but it always puts pressure on the ears, and before you realize it, it puts a strain on your ears and accumulates fatigue. To do. Compared to the shape that touches the ear with an organic large surface, the shape that limits the contact area aims for a feeling of wearing without feeling oppressive. The ZE2000 housing is held at three points for a stable fit. There will be 1 point in the pink part (ear pocket), 1 point in the green part (earpiece), and 1 point in the blue part (tragus), for a total of 3 points. Therefore, it fits most people's ears. If there is no pressure at all points of contact, you will feel that the earphones are so comfortable to wear.
Earpieces for the ultimate comfort
Comes with 5 sizes of TYPE E complete wireless earpieces, which are popular for their excellent fit and sound insulation. Many common ear tips have a shape that strongly presses the inner part of the ear canal, causing pain and fatigue when worn for a long time. The new TYPE E completely wireless specification is a type that is softly attached to the entrance of the ear canal, so there is almost no feeling of foreign matter. By minimizing the feeling of wearing itself, we have achieved the "supreme feeling of wearing". In addition, the axis colors of adjacent sizes are different (the eartips included with MATTE BLACK alternate between light gray and dark gray, and the eartips included with ASH GRAY alternate between clear and white), making it easy to distinguish sizes. increase. 5 sizes of SS/S/M/L/LL are included. You can choose according to your preference. In addition, since this earphone is often worn slightly shallow at the entrance of the ear canal, the default is to install an L size earpiece.
Simple touch operation is possible
Supporting touch operation, you can easily operate play / stop of music and call / end call. The touch point is on the front and back side of the earphone body (the side without the logo printed), and it is designed to prevent erroneous operation when wearing.
IPX4 life waterproof
Life waterproof IPX4 compatible for peace of mind even in sudden weather changes. You can use it without stress even on rainy days or during sports.
An ideally shaped charging case with an emphasis on comfort
In addition to being thin and compact, it is easy to open and close with one hand, and we were particular about the shape that fits comfortably in your hand when you hold it.
Equipped with auto pairing function
Equipped with an "auto pairing function" that starts pairing just by opening the lid of the charging case. You can listen to music as soon as you put it on your ear. In addition, when the main unit is stored in the charging case and the lid is closed, the power automatically turns off, so you can rest assured that you will not forget to turn it off.
Equipped with one ear mode
Simply put one earbud back into the case and it will automatically switch to "one ear mode" without interrupting your music. In "one ear mode", stereo playback is switched to monaural playback * 1, so there is no discomfort even when enjoying music with one ear. It is useful when you want to enjoy music without shutting out external sounds, such as listening to music with one ear while cooking.
