Price:
$3,899
*Check with our team or your local store for availability.
We guarantee that all of our stock is 100% genuine,
Australian sourced stock, with full local warranty.
Australian sourced stock, with full local warranty.
Description
- With two types of input connectors (balanced XLR and unbalanced RCA) the Brooklyn AMP is suitable for a wide variety of applications and installed systems
- Analog outputs: RCA, balanced XLR, simultaneous
- Three operating modes: Stereo, BI-AMP and Bridge
- Electrical component protection
- Mytek Software accessible via usb micro allows for possible future firmware update and unit identification
- LED logo power indicator
Output Power in stereo and bi-amp mode |
1kHz @ 8, 4, 2 Ohm: 2x 300W |
Output Power in bridge mode |
1kHz @ 8, 4Ohm: 1x 600W |
Burst Output Power in stereo and biamp |
1kHz @ 8, 4, 2 Ohm: 2x 500W |
Burst Output Power in bridge mode |
1kHz @ 8, 4 Ohm: 1x 1000W |
Output voltage in stereo and biamp mode |
70Vp/140Vpp unloaded |
Output voltage in bridge mode | 140Vp/280Vpp unloaded |
Frequency Response |
-3dB: 10 Hz - 30 kHz: +0/-0.25 dB |
Upper bandwidth | @ -3dB for RL = 8 Ohm: 85kHz |
@ -3dB for RL = 4 Ohm: 65kHz | |
@ -3dB for RL = 2 Ohm: 44kHz | |
THD+N (1kHz @ 1W) |
0.002 % |
THD+N (typical) |
< 0.04 % (20 Hz - 20 kHz, 8 Ohm load, 3 dB below rated power) |
Signal To Noise-Ratio |
> 121 dB (A-weighted, 20 Hz - 20 kHz, 8 Ohm load) |
Input gain control | 23dB (default), 29dB dip switch selectable |
Input Impedance | 10 kOhm |
Operation Voltage Universal Mains | 85-265V |
Protection Circuits | short circuit protection, DC protection, under voltage protection, temperature protection, overload protection |
Dimensions (mm) |
216 x 241 x 44 |
Weight | 6lbs / 3 kg |
Warranty |
2 Years |
- Mytek Brooklyn AMP
- Power cord
- Owner's manual