Schiit Audio Saga + Stereo Pre-Amplifier

Schiit Audio Saga + Stereo Pre-Amplifier

Name: Schiit Audio Saga + Stereo Pre-Amplifier
Brand: Schiit Audio
SKU: SA.SAGAPLUS
Price: 859.0 AUD
Availability: OutOfStock

Schiit Audio

Price:

$859

*Check with our team or your local store for availability.

We guarantee that all of our stock is 100% genuine,
Australian sourced stock, with full local warranty.

Share this product

Please note this item is not in stock. Pre-order only. There is no ETA from the supplier.

Also note:

The box is opened to track the serial number, as Schiit does not have this on the outside of the box.

Saga+ gives you all the uber-high-end, no-compromises features you need in a preamp—without the insane price. Saga+ brings you a real relay-switched volume control, which you can use in pure passive mode, or run it through a 6SN7 hybrid tube buffer. Saga+ even includes a custom remote control.

Saga+: Easiest Relay-Switched Volume, Ever
The benefits of a relay-switched stepped attenuator for volume are clear. Compared to a potentiometer, they give you essentially perfect channel matching and near-unmeasurable distortion. However, some preamps with relay-stepped attenuators confuse you with buttons and screens. Not Saga+. Saga+ has a volume knob that works just like a volume knob—just grab and turn. And if you use the remote control, the motorized potentiometer changes to match the remote setting.

It’s Your Choice: Passive or Active
Go ahead. Run Saga+ in passive mode for a convenient remote-controlled passive preamp that’s ideal for many systems. If you need to drive long cables, switch it to the hybrid tube buffer—a serious buffer running on 200V rails with vanishingly low distortion.

Perfect Companion to Our DACs
Want a remote-controlled system to interface your digital gear with the rest of your system? Stack Saga+ and Bifrost (or any other of our DACs) for a true no-compromise remote-controlled system.

Designed and Assembled In USA
By “designed and assembled in USA" this is what we mean: the vast majority of the total production cost of Saga+—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal.

Ultra-high-end preamp
Stepped attenuator volume control
Can be run fully passively—or connected to a unique hybrid 6SN7 tube buffer
Designed and Built in California

Hybrid Tube Buffer Stage
Frequency Response	20Hz-20Khz, -0.2db, 3Hz-200KHz, -3dB
THD	<0.001%, 20Hz-20KHz, at 1V RMS
IMD	<0.001%, CCIR (active stage)
SNR	>108db, A-weighted, referenced to 1V RMS
Output Impedance	180 ohms
Maximum Output	>10V RMS
Passive Stage
Output Impedance	Varies, maximum 4.8 kohms
Both Passive or Active Stage
Gain	Approximately 1 (0dB) through either passive or active stage
Input Impedance	10 kohms
Crosstalk	>-75dB, 20Hz-20KHz
General Specifications
Inputs	5 RCA pairs, selectable via front switch or remote
Outputs	2 RCA pairs, selectable via front switch or remote
Buffer Stage	Hybrid push-pull tube-BJT buffer stage with equalized transconductance
Volume Control	Relay-switched stepped attenuator with discrete thin-film resistors , 64 1dB steps
Power Supply	One 24VA transformer with regulated +/-100V rails, plus 6.3VDC heaters and 5VDC for microprocessor
Power Consumption	25W typical
Size	9"W x6"D x 2"H, plus additional 1.25" H for tube
Weight	6 lbs
Warranty	Saga + Stereo Pre-Amplifier (60 Months)
Warranty	Tubes (90 Days)

Saga+
Power cord
6N8S or 6SN7 tube

Schiit Audio Saga Plus User Manual

Recover password

Create my account

Schiit Audio Saga + Stereo Pre-Amplifier

Description

Hybrid Tube Buffer Stage

Passive Stage

Both Passive or Active Stage

General Specifications

Customer Reviews

In the same category

Recently viewed