*Check with our team or your local store for availability.
We guarantee that all of our stock is 100% genuine, Australian sourced stock, with full local warranty.
Share this product
Description
The HPA V202 is a newly developed product in the Violectric range.
This headphone amplifier is an advanced development of the famous “V200” circuitry. The roots of the headphone amplifier circuitry can be found in its praised and rewards winning predecessors V200, V220, V280 and V281. Inside HPA V202 it features the similar natural but smooth and pleasing sound. Because of its matchless technology HPA V202 not only offers a powerful headphone amplifier, but also:
LOWEST NOISE Through a very small amount of internal gain. This makes the amplifier's self-generated noise inaudible.
HIGH OUTPUT VOLTAGE Through 60 V internal operating voltage. Therefor ideally suited for high-impedance headphones deserving high output voltage swing.
HIGH OUTPUT POWER Thanks to powerful amplifiers that offer far more power even the most demanding headphones would need. So best suited for headphones with low impedances as well as magnetostatic headphones !!
HIGH DAMPING FACTOR Due to lowest output impedance. Therefore the ideal match for difficult to drive headphones without negative side effects and with the guarantee for a uncompromising frequency response.
2 stereo inputs, balanced via XLR, unbalanced via RCA
Inputs switchable on the front panel
+/- 18 dB Pre-Gain for a perfect match of the HPA V202 between source and headphones
Volume control with Alps RK 27 attenuator
Big 38 mm massive aluminum knob
Powerful stereo amplifier
2700 mW Pmax into 50 Ohm
18,5 V RMS into 600 Ohm
Delayed coupling of the headphones to the amp after power-on
Headphone outputs: 1 x Pentaconn, unbal. / 1 x 1⁄4” jack, unbal.
Built-in power supply with toroidal transformer
22.000 uF filter capacity
Analogue input parameter
Inputs (stereo)
1 x XLR balanced, 1 x RCA, unbalanced
Max. input voltage
+ 21 dBu,
Input impedance
10 kohm
Headphone amp parameter
Nominal input sensitivity
+6 dBu
Feedback gain
+8 dB
PRE-GAIN
-18 / -12 / -6 / 0 / +6 / +12 / +18 dBr
Frequency range
5 Hz ... 250 kHz (- 0,5 dB)
Output impedance
0,25 Ohm
Damping factor (Load 50 R)
200
Dynamic range
> 128 dB (A-wtd)
Noise
< -100 dBu (A-wtd)
THD+N (1kHz/2x10V/100R=1W)
< -100 dB / < 0,001 %
THD+N (1kHz/2x4V/32R=0,5W)
< -103 dB / < 0.0007 %
Crosstalk
-100 dB (1 kHz) / -95 dB (15 kHz)
Headphone outputs
1 x Pentaconn, unbal. / 1 x 1/4“ (6.3 mm) TRS jack
General
Supply voltage
230 V AC / 115 V AC max. 10 VA
Front, Back
5 mm / 2,5 mm Aluminum, black anodized
Case
3 mm / 4 mm Aluminum, black anodized
Case dimensions
170 x 54 x 228 mm (W x H x D)
Overall dimensions
170 x 65 x 252 mm (W x H x D)
Customer Reviews
In the same category
Recently viewed
Free shipping Australia wide* *Excluding orders under $99