Violectric HPA V220 Headphone Amplifier

Violectric

*Please check with our online customer service team or your local store for stock availability

Genuine
The HPA V220 is designed to deliver the ultimate in transmission quality on low, medium and high impedance headphones. Thanks to its optimized, dynamic, variable-noise, low-noise circuit technology, the HPA V220 meets the highest requirements. The amplifiers in the HPA V220 are elaborately constructed with 8 transistors per channel and correspond to those of the multiple test winner HPA V200! Further, the HPA V220 offers the convenience of key-activated inputs and output management.
  • The amplifiers in the HPA V220 are elaborately constructed with 8 transistors per channel and correspond to those of the multiple test winner HPA V200! Further, the HPA V220 offers the convenience of key-activated inputs and output management.

    - Line outputs configurable fixed / variable (pre / post fader)
    - Lowest noise
    - Highest output voltage (60 Volt internal operating voltage)
    - Strongest output (best suited for low-impedance headphones - also magnetostats)
    - Highest damping factor
    - Pre-gain (5-fold pre-amplification)
    - Channel-separated structure
    - DC coupled (can be switched off)
    - ALPS RK27 high-grade volume control
    - High quality OpAmps in the signal path
    - ALPS RK27 high grade balance regulator
    - High quality MKP capacitors in the signal path
    - 0.1% and 1% metal film resistors throughout the device
    - Discretely constructed power amplifiers with 8 transistors per channel
    - 2 headphone jacks, Neutrik, silver plated
    - Delayed connection / disconnection of the headphone connections via relay
    - Toroidal transformer
    - High sieve capacity in the power supply
    - Ground lift switchable

  • Balanced inputs via XLR, Neutrik, gold-plated
    Unbalanced inputs with gold-plated premium RCA sockets
    Balanced outputs via XLR, Neutrik, gold-plated
    Unbalanced line outputs with gold-plated premium RCA jacks
    Optional digital input 2 headphone jacks, Neutrik, silver plated
    Discretely constructed power amplifiers with 8 transistors per channel
    High quality MKP capacitors in the signal path
    ALPS RK27 high-grade volume control
    ALPS RK27 high grade balance regulator
    Output management via front panel buttons (line outputs active, headphone outputs active, both active, mute)
    Delayed connection / disconnection of the headphone connections via relay
  • In-/Output: 2 / 2 channels (sym XLR), 2 / 2 channels (unsym. RCA)

    Headphone outputs:

    2

    Frequency response:

    5 Hz - 70 kHz (-0.5 dB)

    Input sensitivity

    +6 dBu

    Input impedance

    10 kOhm

    Output impedance

    < 0.01 Ohm (unsym.)
    max. input level: +21 dBu
    max. output level: 670 mW (600 Ohm) _ 3050 dBu (100 Ohm) _ 2700 mW (50 Ohm) _ 2800 mW (32 Ohm) _ 1500 mW (16 Ohm)

    Noise ratio (SNR):

    > 129 dB (A-wt.)

    THD+N (@-1 dBFs):

    < -102 dB (0.00079%)

    Crosstalk:

    -105 dB
    Extras: optional digital input and remote control available

    Power supply:

    230 V / 115 V AC
    Casing: desktop

    Dimensions:

    170 x 112 x 320 mm (WxHxD)
    Color: black


Next Previous