Topping A50s Headphone Amplifier [DEMO UNIT]

Name: Topping A50s Headphone Amplifier [DEMO UNIT]
Brand: TOPPING
SKU: TOP.A50S.BK.DEMO.1654123
Price: 149.0 AUD
Availability: OutOfStock

Save $50

TOPPINGSKU: TOP.A50S.BK.DEMO.1654123

Price:

$149 $199

*Check with our team or your local store for availability.

We guarantee that all of our stock is 100% genuine,
Australian sourced stock, with full local warranty.

DEMO UNIT

This product has been tested and assessed by our team, and is sold in working and resellable condition.

This product may feature minor physical blemishes, and may therefore not be in pristine physical condition. If there is any notable blemish present however, we will provide additional information below this disclaimer, accompanied with photos above which highlight the notable imperfections listed.
We cannot provide any further photos of the unit's current physical condition beyond those available in this listing.
*If applicable* - This product has been tested to ensure that the device functions, and the battery discharges properly. Unfortunately we cannot provide any exact charging or battery life information.
If this product is missing any factory accessories, the missing accessories will be listed under this disclaimer.
This product is strictly available for online purchase only, and cannot be viewed, purchased or collected in store.
This product comes with full warranty as per the Warranty section on this listing unless otherwise specified. If there is no warranty period outlined in the Warranty section below, please get in touch with our Customer Care team for more information.

2 step gain settings, adapt to various sensitivities
A50s is equipped with two gain settings of 0dB/6dB at SE output(6dB/12dB at balanced output). Wide range of gain settings and the 0.3uVrms ultra-low noise makes A50s easily adapt to all types of headphones from extremely sensitive IEMs to most power demanding full-sized over-ears.

Also an excellent preamp
The NFCA modules of A50s are not only able to drive the headphones but also apply to be a preamplifier with the same ultra-high performance. When it is in preamp mode, output impedance is as low as 20ohm, which is widely suitable for various devices.

HPA/PRE automatic switching
When the A50s is not connected to any headphones, it automatically works in the preaplifier mode, and the amplified signal is output from the RCA on the back panel. When the headphone is connected to 6.35mm or 4.4mm output, A50s automatically switches to the headphone amp mode, and lhe signal is only output to the 6.35mm and 4.4mm jack.

Ultra-High Performance NFCA balanced modules
A50s uses the same NFCA (Nested Feedback Composite Amplifier) module from flagship A90. Voltage Current hybrid feedback architecture along with UHGF (Ultra High Gain Feedback) technology provides excellent DC and AC performance. High output current drive capability allows the amp driving low impedance headphones with ease. Ultra-low noise of 0.3uV is miles ahead of the competition, giving an absurdly high dynamic range of 144dB and no audio noise and darkest background for the most sensitive IEMs.

Full Aluminum case
A50s uses full aluminum case with unique workmanship. The outer casing is made of an aluminium brick through CNC precision machining. The outer casing is designed with thermal conductive column to dissipate heat from the power supply and OP-AMP through the entire outer casing.

6.35mm SE & 4.4mm balanced output
Although there is only a single-ended input, A50s has a built-in balanced amp circuit. Therefore, it can drive single-ended headphones by 6.35mm output, and drive balanced headphones by 4.4mm balanced output.

Wide range of adaptation to headphones
A50s has a high voltage swing of 42Vp-p, power of 3500mW per channel when both channels are driven and output impedance of less than 0.1 Ohm. It easily drives power-hungry headphones with a wide range of different impedance.

4.4mm Balanced Output
0dB and 6dB Step Gain setting
NFCA Modules
<0.00007% THD+N
144dB DNR
<0.3uVrms Noise
<0.1 Ω Output Impedance
3500mW x2 Maximum Output Power

THD+N @ 1kHz A-wt 6.35mm Headphone jack	<0.00007% @ Output=850mW(32Ω)
THD+N @ 1kHz A-wt 6.35mm Headphone jack	<0.00006% @ Output=90mW(300Ω)
THD+N @ 1kHz A-wt 4.4mm Balanced Headphone jack	<0.00007% @ Output=3.4W(32Ω)
THD+N @ 1kHz A-wt 4.4mm Balanced Headphone jack	<0.00006% @ Output=367mW(300Ω)
THD @ 20-20kHz 90kBW 6.35mm Headphone jack	<0.0004% @ Output=720mW(32Ω)
THD @ 20-20kHz 90kBW 6.35mm Headphone jack	<0.0002% @ Output=77mW(300Ω)
THD @ 20-20kHz 90kBW 4.4mm Headphone jack	<0.001% @ Output=2.88mW(32Ω)
THD @ 20-20kHz 90kBW 4.4mm Headphone jack	<0.0005% @ Output=307mW(300Ω)
SNR @Max Out 1kHz A-wt 6.35mm Headphone jack	137dB
SNR @Max Out 1kHz A-wt 4.4mm Headphone jack	143dB
Dynamic Range @1kHz A-wt 6.35mm Headphone jack	138dB
Dynamic Range @1kHz A-wt 4.4mm Headphone jack	144dB
Frequency Response	20Hz-200kHz(±0.05dB)
Output Level 6.35mm Headphone jack	21Vpp
Output Level 4.4mm BAL Headphone jack	42Vpp
AP measured noise level @A-wt 6.35mm Headphone jack	<0.7uVrms @G=L
AP measured noise level @A-wt 6.35mm Headphone jack	<0.8uVrms @G=H
AP measured noise level @A-wt 4.4mm BAL Headphone jack	<0.9uVrms @G=L
AP measured noise level @A-wt 4.4mm BAL Headphone jack	<1.1uVrms @G=H
Actual noise level* @A-wt 6.35mm Headphone jack	<0.3uVrms @G=L
Actual noise level* @A-wt 6.35mm Headphone jack	<0.45uVrms @G=H
Actual noise level* @A-wt 4.4mm BAL Headphone jack	<0.6uVrms @G=L
Actual noise level* @A-wt 4.4mm BAL Headphone jack	<0.95uVrms @G=H
Channel Crosstalk @1kHz 6.35mm Headphone jack	-86dB
Channel Crosstalk @1kHz 4.4mm BAL Headphone jack	-128dB
IMD CCIF@(18kHz + 19kHz)	-116dB
IMD SMPTE @(60Hz + 7kHz) 6.35mm Headphone jack	-110dB, SMPTE4: 1
IMD SMPTE @(60Hz + 7kHz) 6.35mm Headphone jack	-118dB, SMPTE1: 1
Input Sensitivity	7.5Vrms@G=0dB
Input Sensitivity	3.8Vrms@G=6dB
Gain 6.35mm Headphone jack	0.0dB @G=0dB
Gain 6.35mm Headphone jack	6.0dB @G=6dB
Gain 4.4mm BAL Headphone jack	6.0dB @G=0dB
Gain 4.4mm BAL Headphone jack	12.0dB @G=6dB
Output Impedance 6.35mm Headphone jack	<0.1Ω
Output Impedance 4.4mm BAL Headphone jack	<0.2Ω
Output Power THD+N<1% 6.35mm Headphone jack	1.4W x 2 @32Ω
Output Power THD+N<1% 6.35mm Headphone jack	192mW x 2 @300Ω
Output Power THD+N<1% 4.4mm BAL Headphone jack	3.5W x 2 @32Ω
Output Power THD+N<1% 4.4mm BAL Headphone jack	760mW x 2 @300Ω
Output Power @2Vrms IN 6.35mm Headphone jack	485mW x 2 @32Ω
Output Power @2Vrms IN 6.35mm Headphone jack	52mW x 2 @300Ω
Output Power @2Vrms IN 4.4mm BAL Headphone jack	1950mW x 2 @32Ω
Output Power @2Vrms IN 4.4mm BAL Headphone jack	208mW x 2 @300Ω
Load Impedance	>8Ω

Topping A50s Desktop Headphone Amplifier

Recover password

Create my account

Topping A50s Headphone Amplifier [DEMO UNIT]

Description

Customer Reviews

In the same category

Recently viewed