Simaudio MOON 430HAD Headphone Amplifier with DSD Capable DAC

MOON by Simaudio

*Please check with our online customer service team or your local store for stock availability


The Neo 430HA is the new reference for headphone amplifiers.

Includes DSD Capable DAC
  • The Nēo 430HA is a genuine “tour de force” loaded with numerous state-of-the-art features. This fully balanced, pure analog headhone amplifier using a discrete transconductance circuit topology, selectable gain setting (14 or 20dB), an oversized power supply and a defeatable analog crossfeed circuit. Rated at 667mW at 600 ohms and 8W at 50 ohms, the Nēo 430HA will effortlessly drive any headphone to its full potential.

    For headphone enthusiasts who desire perfection, the Nēo 430HA is the ultimate solution. Borrowing several technologies developed for our more exotic and costlier Evolution series (M-LoVo, M-eVOL2) while incorporating the most advanced analog audio circuitry, the 430HA will achieve the very best possible sonic performance from your headphones. The optional DSD256 and 32-bit PCM capable DAC can be used with virtually any digital source such a computer for streaming music, satellite TV receiver or Blu-Ray player, offering the same fidelity as your music system.

    The Nēo 430HA is the new reference for headphone amplification and is destined to create a whole new set of standards for performance.

    Of course, key features you’d expect in a MOON Nēo Series product are present such as 12V triggers and an RS-232 port for custom-install environments.

    • Inputs include 1 balanced on XLR’s, 2 single-ended on RCA’s and 1 single-ended on 1/8” jack located on the front panel.
    • Outputs include a pair of 3-pin XLR and one 4-Pin XLR located on the front panel behind a sliding window, a ¼” TRS jack, as well as both fixed and variable single-ended line-level RCA stereo pairs.
    • Four (4) stages of our own M-LoVo (MOON Low Voltage) DC regulation circuit to significantly lower the noise floor.
    • M-eVOL2 volume control with 530 steps and channel matching of 0.1dB.
    • Fully asynchronous DAC with four (4) digital inputs (S/PDIF x 2, TosLink x 1 & USB x 1) allowing for use with virtually any digital source; Supports DSD64, DSD128 and DSD256 (USB input only); Supports PCM up to 24-bit/192kHz (all inputs) and 32-bit/384kHz (USB input only).
  • Output power per channel @ 600 / 300 / 50Ω: 667mW / 1.33W / 8W

    Headphone Impedance: 20 - 600Ω

    Frequency Response (audible): 20Hz - 20kHz ±0.1dB

    Frequency Response (full range): 5Hz - 100kHz +0/-3dB

    THD @ 1kHz, 0dBFS (A-weighted): 0.005%

    Intermodulation distortion: 0.005%

    Signal-to-noise Ratio: 120dB

    Crosstalk: 110dB

    Input / Output impedance: 22KΩ / 1.25Ω

    Shipping weight: 20 lbs. / 9 Kgs

    Dimensions (width x height x depth): 16.9 x 3.5 x 13.8 in. 42.9 x 8.9 x 35.1 cm