Price:
$7,999
$13,500
*Check with our team or your local store for availability.
We guarantee that all of our stock is 100% genuine,
Australian sourced stock, with full local warranty.
Australian sourced stock, with full local warranty.
Description
- Can be used with legacy products via the legacy range of cables.
- Separate DR PSUs for power amplifier, including the XLR input stage.
- Eight NA009 Naim custom designed power transistors as developed for Statement (4 for the PSUs and 4 for the output stages). Each mounted on ceramic insulators for ultra low capacitive coupling.
- New triple transistor constant current source (CCS) in delicate gain stage - uses a newly developed CCS for improved sound quality.
- Party-proof: new heatsink design responds to temperature fluctuation, keeping things cool.
- 20 minute auto power off for legacy systems, will wake on detecting music (auto off can be disabled).
- 0.5W standby power
- Using two internal power supplies; one is a high quality audiophile linear type, based on a large toroidal transformer. The other is a highly efficient SMPSU for 0.5W power consumption in standby during standby mode.
- Soft-start power up sequence, preventing the large toroidal transformers from tripping mains circuit breakers due to the large influx of voltage required.
- 3.5mm optical inter-product communications for synchronised system control, preventing ground loops. This facility offers LED brightness and power control.
- Eddy current divide situated between speaker output terminals for improved sound quality.
- Custom audiophile components such as polystyrene capacitors in filter circuits for low dielectric absorption.
- Through-hole components reducing microphonies picked up via the circuit board fluctuations.
Type | Power Amplifier |
Power output | 100 Watts 8 @0.1% THD+N (100W @0.1%) 190 Watts 4 @1% THD+N |
Gain | +29dB |
Inputs | 2 x True balanced via XLR, 47k 34k singled ended via legacy adaptor lead |
Frequency Response | -3dB @ 1.4Hz to 100kHz |
Passive Consumption | 26W (idle) |
Standby consumption | <0.5W |
Mains supply | 115V or 230V, 50/60Hz |
Burst Power 2(1kHz for 20mS, repear 500mS IHF) | 300 Watts 2 @1% THD+N |
Peak current into 1 (1kHz 1mS) | +/-28 amps peak (780W peak power) |
THD+N at 2/3rds full power 8 @1kHz | 0.013% |
Input signal for clipping | 1V RMS |
Signal to noise ratio ref 1W 8 A-weighted | 91dB |
Signal to noise ratio ref 100W 8 A-weighted | 111dB |
Cross talk | 60dB |
Damping factor into 8 | 36 |
Dimensions (HxWxD) | 35/8x17x121/2" (9.15x43.2x31.75cm) |
Weight | 37.04lbs (16.8kg) |
- NAP250 Power Amplifier
- Australian IEC Power Cable
- Manual