$7,999 $13,500
*Check with our team or your local store for availability.
We guarantee that all of our stock is 100% genuine,
Australian sourced stock, with full local warranty.


  • Can be used with legacy products via the legacy range of cables.
  • Separate DR PSUs for power amplifier, including the XLR input stage.
  • Eight NA009 Naim custom designed power transistors as developed for Statement (4 for the PSUs and 4 for the output stages). Each mounted on ceramic insulators for ultra low capacitive coupling.
  • New triple transistor constant current source (CCS) in delicate gain stage - uses a newly developed CCS for improved sound quality.
  • Party-proof: new heatsink design responds to temperature fluctuation, keeping things cool.
  • 20 minute auto power off for legacy systems, will wake on detecting music (auto off can be disabled).
  • 0.5W standby power
  • Using two internal power supplies; one is a high quality audiophile linear type, based on a large toroidal transformer. The other is a highly efficient SMPSU for 0.5W power consumption in standby during standby mode.
  • Soft-start power up sequence, preventing the large toroidal transformers from tripping mains circuit breakers due to the large influx of voltage required.
  • 3.5mm optical inter-product communications for synchronised system control, preventing ground loops. This facility offers LED brightness and power control.
  • Eddy current divide situated between speaker output terminals for improved sound quality.
  • Custom audiophile components such as polystyrene capacitors in filter circuits for low dielectric absorption.
  • Through-hole components reducing microphonies picked up via the circuit board fluctuations.
Type Power Amplifier
Power output 100 Watts 8 @0.1% THD+N (100W @0.1%)
190 Watts 4 @1% THD+N
Gain +29dB
Inputs 2 x True balanced via XLR, 47k
34k singled ended via legacy adaptor lead
Frequency Response -3dB @ 1.4Hz to 100kHz
Passive Consumption 26W (idle)
Standby consumption <0.5W
Mains supply 115V or 230V, 50/60Hz
Burst Power 2(1kHz for 20mS, repear 500mS IHF) 300 Watts 2 @1% THD+N
Peak current into 1 (1kHz 1mS) +/-28 amps peak (780W peak power)
THD+N at 2/3rds full power 8 @1kHz 0.013%
Input signal for clipping 1V RMS
Signal to noise ratio ref 1W 8 A-weighted 91dB
Signal to noise ratio ref 100W 8 A-weighted 111dB
Cross talk 60dB
Damping factor into 8 36
Dimensions (HxWxD) 35/8x17x121/2" (9.15x43.2x31.75cm)
Weight 37.04lbs (16.8kg)
  • NAP250 Power Amplifier
  • Australian IEC Power Cable
  • Manual

Customer Reviews

In the same category